SOCO Driven pallet roller conveyors

For floor mounting. The maximum length of a roller conveyor with one gear motor is 4.5 m with a maximum payload of 1500 kg. All sections are supplied with coupling fittings.

Specifications

Surface treatment

Electro galvanized steel with the exception of gear motor, chain, and roller axles. Rollers are electro galvanized with yellow crome.

Frames

Cold-bend angle profiles bolted to C-profile cross bars with supports.

Rollers

Ø 80 mm electro galvanized steel tubes.

Axle diameter

Ø 17 mm.

Bearings

6203 – 2rs.

Roller fittings

Rollers are suspended between side frames by means of M10 axle.

Payload

For use up to 1.500 kg load (max 1.000 kg for RP=178) per pallet and motor unit. Maximum suitable load is determined by several factors like speed of operation, width of conveyor, and shape and width of the pallets. If in doubt, please contact SOCO SYSTEM.

Standard height

The total height from floor to top of rollers is 90 mm.

Chain drive

Chains operate beneath roller surface. Chain drive is from roller to roller. ½” sprockets of hardened steel are integrated with the bearing of the roller.

Chain cover

Chains are protected by a U-profile mounted above the chains. The chain cover is beneath the roller level to ensure access to pallets from both sides of the conveyor.

Gear motor

0,37 kW. Worm reduction gear side-mounted on conveyor frame.

Speed

11,4 m/min (other speeds available).

    Subject to alteration.